2-Door

Door Lock Knob Switch Test

2-door

1. Remove the driver's door panel.




2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the No. 1 and No. 2 terminals.
- There should be continuity when the door lock knob switch is in the LOCKED position.
- There should be no continuity when the door lock knob switch is in the UNLOCKED position.

4. Check for continuity between the No. 1 and No. 3 terminals.
- There should be continuity when the door lock knob switch is in the UNLOCKED position.
- There should be no continuity when the door lock knob switch is in the LOCKED position.

5. If the continuity is not as specified, replace the door lock actuator.