Reverse Shift Fork Clearance Inspection

Reverse Shift Fork Clearance Inspection





1. Measure the clearance between reverse idler gear (A) and the reverse shift fork (B) with a feeler gauge (C). If the clearance is more than the service limit, go to step 2.
Standard: 1.3 - 1.9 mm (0.05 - 0.07 inch)
Service Limit: 2.5 mm (0.1 inch)





2. Measure the width of the reverse shift fork.
^ If distance is not within the standard, replace the reverse shift fork with a new one.
^ If distance is within the standard, replace the reverse idler gear with a new one.
Standard: 13.5 - 13.8 mm (0.53 - 0.54 inch)