Rocker Arm Assembly and Camshaft Installation
Installation1. Reassemble the rocker arm assembly.
2. Install the camshaft (A) and rocker arm assembly (B).
3. Apply engine oil to the bolt threads and flange. Tighten each bolt two turns at a time in sequence.
Specified torque:
8 mm bolts: 22 Nm (2.2 kgf-cm, 16 ft. lbs.)
6 mm bolt: 12 Nm (1.2 kgf-cm, 8.7 ft. lbs.)
6 mm bolt: (21)
4. Install the camshaft sprocket, then adjust the valve clearance.