Linkage Disassembly/Reassembly - Manual

Front Seat Linkage Disassembly/Reassembly - Manual




'04-05 Models 2-door

- The front passenger's weight sensor (SWS) unit must be calibrated after any of these actions :
- Front passenger's seat replacement (including any seat components)
- Replacement of the seat weight sensors
- Replacement of the seat weight sensor unit

NOTE:
- Put on gloves to protect your hands.
- Apply oil to the pivot portions of the slide locks.
- Apply multipurpose grease to the sliding portions of the seat tracks.
- When tightening the weight sensor mounting bolts, tighten the bolts in the sequence shown. Improper tightening could cause the front passenger's airbag system to malfunction.
- Make sure the weight sensor unit connectors are plugged in properly.
- Make sure the weight sensor wires are routed properly so they are not pinched and do not interfere with other parts.




'04-05 Models 4-door

- The front passenger's weight sensor (SWS) unit must be calibrated after any of these actions
- Front passenger's seat replacement (including any seat components)
- Replacement of the seat weight sensors
- Replacement of the seat weight sensor unit

NOTE:
- Put on gloves to protect your hands.
- Apply oil to the pivot portions of the slide locks
- Apply multipurpose grease to the sliding portions of the seat tracks.
- When tightening the weight sensor mounting bolts, tighten the bolts in the sequence shown. Improper tightening could cause the front passenger's airbag system to malfunction.
- Make sure the weight sensor unit connectors are plugged in properly.
- Make sure the weight sensor wires are routed properly so they are not pinched and do not interfere with other parts.