Disassembly/Reassembly - Manual Height Adjustable

Front Seat Disassembly/Reassembly - Manual Height Adjustable

Special Tools Required
KTC trim tool set SOJATP2014

- SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
- '04-05 models: The operation of the driver's seat position sensor must be checked after any of these actions :
- Driver's seat position sensor replacement
- Cover plate (front side of driver's seat slide rail) replacement

NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Apply multipurpose grease to the moving parts of the height ratchet unit and seat track.
- To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.