Disassembly/Reassembly - 4-Way Power

Front Seat Disassembly/Reassembly - 4-Way Power

'03 Model 4-door





Special Tools Required
KTC trim tool set SOJATP2014

SRS components are located in this area. Review the SRS component locations, refer to precautions and procedures (see page 23-19) before performing repairs or service.

NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Apply multipurpose grease to the moving parts of the seat track.
- To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.


'04-05 Models 4-door





Special Tools Required
KTC trim tool set SOJATP2014

- SRS components are located in this area. Review the SRS component locations, refer to precautions and procedures before performing repairs or service.
- The front passenger's weight sensor (SWS) unit must be calibrated after any of these actions:
- Front passenger's seat replacement (including any seat components)
- Replacement of the seat weight sensors
- Replacement of the seat weight sensor unit

NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Apply multipurpose grease to the moving parts of the seat track.
- To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.