P2227

DTC P2227: BARO Sensor Range/Performance Problem - 2004 model

NOTE: Information marked with an asterisk (*) applies to 2000-2003 models.

1. Reset the ECM.
2. Start the engine. Hold the engine at 3,000 rpm with no load (in Park or neutral) until the radiator fan comes on, then let it idle.
3. Test-drive with A/T in D position. (M/T in 4th gear)
4. Accelerate for 5 seconds using wide open throttle.
5. Check for a Temporary DTC with the scan tool.

Is Temporary DTC P2227 (P1106)* indicated?

YES - Update the ECM if it does not have the latest software, or substitute a known-good ECM, then recheck. If the symptom/indication goes away with a known-good ECM, replace the original ECM.

NO - Intermittent failure, system is OK at this time.