Rear Seat-Back Cover Replacement
Rear Seat-back Cover ReplacementNOTE:
^ Take care not to tear the seams or damage the seat covers.
^ Put on gloves to protect your hands.
1. Remove the seat-back.
2. 2004-2005 models: From both sides, pull out the headrest guides (A) while pinching the end of the guides, and remove them.
3. Release all the clips (A), and fold back the seat-back cover (B).
4. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B), then remove the seat-back cover.
5. Install the cover in the reverse order of removal, and note these items:
^ To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing t~e clips.
^ Replace any clips you removed with new ones. install them with commercially available upholstery ring pliers.