4 Door
Trunk Lid Opener Cable/Fuel Fill Door Opener Cable Replacement4-door
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the body and related parts.
1. Remove these items from the left side of the vehicle:
- Front door sill trim
- Seat side trim
- Trunk side trim panel
2. Pull the carpet back as necessary.
3. Disconnect the trunk lid opener/fuel fill door opener cable (A) from the opener (B).
4. Release the opener cable from the clip (C). Remove the cushion tape (D), and detach the clip (E) by using a clip remover.
5. Remove the fuel fill door latch (F) by turning it 90 °, and detach the opener cable junction box (G) from the body.
6. Disconnect the trunk lid opener cable (A) from the trunk lid latch (B).
7. Using a clip remover, detach the clip (C) from the body, and detach the clips (D) from the trunk lid hinge
8. Remove the trunk lid opener/fuel fill door opener cable from the vehicle. Take care not to kink the cable.
9. Install the cable in the reverse order of removal, and note these items.
- Align the alignment mark of the cable to the clip on the bottom portion of the trunk lid hinge.
- Replace any damaged clips.