Trim Panel: Service and Repair
Trim Removal/installation - Door AreaSpecial Tools Required
KTC trim tool set SOJATP2O14
NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown. To remove the driver's kick panel, remove the footrest, to remove the rear seat side trim, remove the seat-back, '03 model, '04-05 models and to remove the front side cap and opener lock cylinder, refer to trunk lid opener/fuel fill door opener replacement.
2. Install the parts in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Apply liquid thread lock to the front seat belt upper anchor bolt before installation.
- Before installing the anchor bolts, make sure there are no twists or kinks in the belts.