Rear Shelf: Service and Repair

Trim Removal/Installation - Rear Shelf Area

Special Tools Required
KTC trim tool set SOJATP2O14

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or scratch the trim and panels.

1. Remove the trim as shown. To remove the rear shelf, remove the rear seat-back, '03 model, '04-05 models.




2. Install the parts in the reverse order of removal, and note these items:
- Apply liquid thread lock to the seat belt anchor bolt.
- Replace any damaged clips.
- When installing the rear shelf, slip the rear seat belts and center belt through the slits and hole in the rear shelf.
- Make sure the high mount brake light connector is plugged in properly.