P1585

DTC P1585 (30): Motor Current Signal Circuit Problem
1. Reset the MCM.
2. Turn the ignition switch OFF.
3. Start the engine. Raise the speed to 3,500 rpm with no load (in Park or neutral) until the state of charge indication above two-thirds.
4. Accelerate using wide open throttle from 12.5 - 25 mph (20 - 40 km/h) in 3rd gear (CVT in D position).
Is DTC P1585 indicated?
YES - Replace the U phase motor current sensor, V phase motor current sensor, and W phase motor current sensor.
NO - Intermittent failure, system is OK at this time. Check for poor connections or loose terminals at the U phase motor current sensor/V phase motor current sensor/V phase motor current sensor and the MCM.