Rear
Rear Seat Belt ReplacementNOTE: Check the rear seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.
Rear Seat Belt - 2-door
1. Remove the rear seat cushion.
2. Remove the lower anchor bolt (A).
3. Remove the side trim panel.
4. Remove the upper anchor bolt (A).
5. Remove the retractor bolt (A), then remove the rear seat belt (B) and retractor (C).
6. Install the seat belt in the reverse order of removal, and note these items:
- Check that the retractor locking mechanism functions.
- Assemble the washers, collar and bushing on the upper and lower anchor belts as shown.
- Before installing the anchor bolt, make sure there are no twists or kinks in the rear seat belt.
Rear Seat Belt - 4-door
1. Remove the rear seat side bolster.
2. Remove the center anchor bolt (A).
3. Remove the rear shelf.
4. Remove the retractor mounting bolt (A), and the retractor bolt (B), then remove the rear seat belt (C) and retractor (D).
5. Install the seat belt in the reverse order of removal, and note these items:
- Check that the retractor locking mechanism functions as described.
- Before installing the anchor bolt, make sure there are no twists or kinks in the rear seat belt.
Center Belt and Seat Belt Buckles
1. Remove the rear seat cushion, 2-door, 4-door.
2. Remove the center anchor bolts (A), and remove the seat belt buckles (B).
3. Remove the rear shelf, 2-door, 4-door.
4. Remove the retractor mounting self-tapping ET screw (A), and the retractor bolt (B), then remove the center belt (C) and retractor (D).
5. Remove the protector (A).
6. Install the seat belt and buckles in the reverse order of removal, and note these items:
- Check that the retractor locking mechanism functions.
- Assemble the washers on the center anchor bolt as shown.
- Before installing the center anchor bolt, make sure there are no twists or kinks in the center belt.