2-Way Adjustable

Motor Test


Driver's 2-way Adjustable Power Seat

1. Remove the driver's seat.




2. Disconnect the 5P connector (A) from the power seat adjustment switch (B).
3. Test the motor (C) by applying battery voltage to the 5P connector No.2 (or No.4) and ground to the No.4 (or No.2) terminals. The motor should run.
4. If the motor does not run or fails to run smoothly, check for an open in the wire between the 5P connector and the motor 2P connector. If the harness is OK, replace the motor.