Trim Removal/Installation - Door Area
Trim Removal/Installation - Door AreaSpecial Tools Required
KTC trim tool set SOJATP2014
2-door
NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown:
- To remove the door sill trim and B-pillar upper trim, remove the side trim panel as necessary.
- To remove the front side cap and opener lock cylinder, refer to trunk lid opener/fuel fill door opener replacement.
2. Install the pants in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Apply liquid thread lock to the anchor bolts before installation.
- Before installing the anchor bolts, make sure there are no twists or kinks in the seat belts.
Special Tools Required
KTC trim tool set SOJATP2014
4-door
NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown:
- To remove the driver's kick panel, remove the footrest.
- To remove the seat side trim, remove the rear seat side bolster.
- To remove the front side cap and opener lock cylinder, refer to trunk lid opener/fuel fill door opener replacement.
2. Install the parts in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Apply liquid thread lock to the anchor bolts before installation.
- Before installing the anchor bolts, make sure there are no twists or kinks in the seat belts.