Trim Removal/Installation - Seat Side and Rear Shelf Area
Trim Removal/Installation - Seat Side and Rear Shelf AreaSpecial Tools Required
KTC trim tool set SOJATP2014
2-door
NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown. To remove the side trim panel, remove the rear seat-back and rear seat cushion.
2. Install the parts in the reverse order of removal, and note these items:
- Before installing the rear shelf, remove the clips from the body, and install them to the rear shelf.
- Replace any damaged clips.
- When installing the rear shelf, slip the rear seat belts and center belt through the slits in the rear shelf.
- Make sure the high mount brake light connector is plugged in properly.
- Apply liquid thread lock to the anchor bolts before installation.