Driver's Dashboard Lower Cover Removal/Installation
Driver's Dashboard Lower Cover Removal/InstallationNOTE:
- Take care not to scratch the dashboard and related parts.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Adjust the steering column upward.
2. Remove the screw (A). Starting at the left lower corner working toward the right, gently pull out the bottom of the driver's dashboard lower cover (B) to detach four clips (C) and a hook (D). If equipped, disconnect the moonroof switch connector (E).
3. While pulling the left of the driver's dashboard lower cover (A) back, pry the clips nearest the center console with a flat-tip screwdriver, then remove the cover.
4. Install the cover in the reverse order of removal, and make sure the connector is plugged in properly.