Center Pocket Removal/Installation

Center Pocket Removal/Installation

SRS components are located in this area. Review the SRS component locations, and the precautions and procedures in the SRS section before performing repairs or service.

NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.

1. Remove the center holder.




2. Remove the center pocket (A):
-1 Remove the screw (B).
-2 Pull the pocket back by hand to detach the clips (C).

3. Install the pocket in the reverse order of removal, and make sure the holders (D) are installed onto the pins (E) properly.