Procedures

Trim Removal/Installation - Rear Shelf Area

2-door

NOTE:
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not to bend or scratch the trim and panels.

1. Remove the trim as shown. To remove the high mount brake light, first disconnect the bulb socket.




2. Install the trim in the reverse order of removal, and note these items:
- Replace any damaged clips.
- When installing the rear shelf, slip the rear center seat belt through the slit in the rear shelf.
- Make sure the high mount brake light bulb socket is connected securely.

4-door

NOTE:
- Put on gloves to protect your hands.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not to bend or scratch the trim and panels.

1. Remove the trim as shown. To remove the high mount brake light, first disconnect the bulb socket.




2. Install the trim in the reverse order of removal, and note these items:
- Replace any damaged clips.
- When installing the rear shelf, slip the rear seat belts and center belt through the slits and hole in the rear shelf.
- Make sure the high mount brake light bulb socket is connected securely.