CD Does Not Eject (With CD Changer)

CD does not eject (with CD changer)

NOTE: Inspect the quality of the CDs, and make sure there are no adhesive labels applied to them.

1. Check to see if the CD disc is ejected correctly by pushing the EJECT button.

Is it normal?

YES - Operation is normal.

NO - Go to step 2.

2. Check to see if it is ejected with some binding or not ejected at all.

Is it ejected with some binding?

YES - Go to step 3.

NO - Go to step 4.

3. Replace the disc and recheck.

Does the problem continue?

YES - Replace audio unit.

NO - Faulty CD disc.

4. Remove the audio unit.




5. Connect the special tool (070AZ-SDA0100) connectors (A) from the printed circuit board connector.
6. Connect the ohm meter to the special tool (070AZ-SDA0200) EJECT and GND terminals.
7. Push the EJECT button and check for continuity between the EJECT and GND terminals.

Is there continuity?

YES - Go to step 8.

NO - Replace the audio-HVAC display panel.

8. Check the audio-HVAC display panel and audio unit for assembling integrity.

Are they assembled correctly?

YES - Replace the audio unit.

NO - Reinstall the audio-HVAC display panel onto the audio unit, and check the problem.