Shifter M/T: Testing and Inspection

Shift Lever Clearance Inspection





1. Measure the clearance between shift lever (A) and the select lever (B) with a feeler gauge (C). If the clearance is more than the service limit, go to step 2.

Standard:
'01 model: 0.05-0.40 mm (0.002-0.016 in.)
'02 model: 0.05-0.35 mm (0.002-0.014 in.)

Service Limit:
'01 model: 0.6 mm (0.024 in.)
'02 model: 0.6 mm (0.024 in.)





2. Measure the groove of the shift lever.
- If distance is not within the standard, replace the shift lever with a new one.
- If distance is within the standard, replace the select lever with a new one.

Standard:
'01 model: 15.00-15.15 mm (0.591-0.596 in.)
'02 model: 13.00-13.15 mm (0.512-0.518 in.)