Part 3 of 7

Mainshaft	Diameter of needle bearing contact area	at stator shaft	Standard or new	22.984 - 23.000 mm
			Service limit	When worn or damaged
		at 3rd gear	Standard or new	52.975 - 52.991 mm
			Service limit	When worn or damaged
		at 4th gear collar	Standard or new	33.975 - 33.991 mm
			Service limit	When worn or damaged
	I.D. of 3rd gear		Standard or new	59.000 - 59.019 mm
			Service limit	When worn or damaged
	I.D. of 4th gear		Standard or new	40.000 - 40.016 mm
			Service limit	When worn or damaged
	End play of 3rd gear		Standard or new	0.03 - 0.31 mm
	End play of 4th gear		Standard or new	0.10 - 0.22 mm
	41 x 73 mm thrust shim thickness	No.1	Standard or new	7.85 mm
			Service limit	When worn or damaged
		No.2	Standard or new	7.90 mm
			Service limit	When worn or damaged
		No.3	Standard or new	7.95 mm
			Service limit	When worn or damaged
		No.4	Standard or new	8.00 mm
			Service limit	When worn or damaged
		No.5	Standard or new	8.05 mm
			Service limit	When worn or damaged
		No.6	Standard or new	8.10 mm
			Service limit	When worn or damaged
	Thrust washer thickness	27 x 47 x 5 mm	Standard or new	5.00 mm
			Service limit	When worn or damaged
	Length of 4th gear collar		Standard or new	58.5 - 58.6 mm
	4th gear collar flange thickness		Standard or new	4.45 - 4.60 mm
			Service limit	When worn or damaged
	Sealing ring thickness	32 mm sealing ring	Standard or new	1.850 - 1.950 mm
			Service limit	1.800 mm
		29 mm sealing ring	Standard or new	1.850 - 1.950 mm
			Service limit	1.800 mm
	Width of sealing ring groove		Standard or new	2.025 - 2.060 mm
			Service limit	2.080 mm
	Clutch feed pipe O.D.	3rd clutch	Standard or new	5.97 - 5.98 mm
			Service limit	5.95 mm
		4th clutch	Standard or new	11.47 - 11.48 mm
			Service limit	11.45 mm
	Clutch feed pipe bushing I.D.	3rd clutch	Standard or new	6.018 - 6.030 mm
			Service limit	6.045 mm
		4th clutch	Standard or new	11.500 - 11.518 mm
			Service limit	11.530 mm