Without Scan Tool
HOW TO CLEAR ABS DTCsHONDA does not provide a procedure for clearing diagnostic trouble codes and/or stored freeze frame data without the use of a Honda PGM Tester.
HOW TO CLEAR TCS DTCs
Service Check Signal (SCS) Circuit Method:
1. Press the parking brake pedal with the SCS circuit opened. Keep the pedal pressed during the entire DTC clearing procedure.
2. Press and hold the TCS switch, then turn the ignition switch ON (II) without starting the engine.
3. Continue to hold the TCS switch for 4 seconds, then turn the ignition switch OFF.
4. Within 6 seconds, turn the ignition switch back ON (II) for at least 4 seconds, then release the TCS switch, and watch the TCS indicator.
5. After a few seconds, the TCS indicator will come on after blinking to indicate that the DTC is cleared.
If the indicator blinks repeatedly, repeat steps 1 through 4.
6. Turn the ignition switch OFF.