Passenger's Window Motor Test

Passenger's Window Motor Test

Front:
1. Remove the passenger's door panel.




2. Disconnect the 2P connector from the window motor.




3. Check window motor operation by connecting power and ground according to the table.

CAUTION: When the motor stops running, disconnect one lead immediately.

4. If the motor does not run or fails to run smoothly, replace it.

Rear:
1. Remove the passenger's door panel.




2. Disconnect the 2P connector from the window motor.

NOTE: The illustration shows the right rear window motor; the left rear window motor is symmetrical.




3. Check window motor operation by connecting power and ground according to the table.

CAUTION: When the motor stops running, disconnect one lead immediately.

4. If the motor does not run or fails to run smoothly, replace it.