Carpet: Service and Repair

SRS components are located in this area. Review the SRS component locations precautions, and procedures before performing repairs or service.

NOTE:
- Put on gloves to protect your hands.
- Take care not to damage, wrinkle or twist the carpet.
- Be careful not to damage the dashboard or other interior trim pieces.

1. Remove these items:

- Front seats, both sides
- Driver's dashboard lower cover
- Passenger's dashboard lower cover
- Center console
- Rear seat cushion
- Front seat belt lower anchor bolt, both sides
- Trunk lid/fuel lid opener

2. Remove these items:

Sedan:
- Front door sill trim (both sides)
- Rear door sill trim (both sides)
- Center pillar lower trim panel (both sides)
- Kick panel (both sides)

Coupe:
- Door sill trim (both sides)
- Kick panel (both sides)




3. Remove the footrest.




4. Remove the bolts from the parking brake lever.

Coupe:

Sedan:

5. Remove the clips (A, B), and release the retainers (C), hooks (D) and fasteners (E), then remove the carpet (F). Put on gloves to protect your hands.
6. Install in the reverse order of removal, and note these items:

- Take care not to damage, wrinkle or twist the carpet.
- Make sure the seat harness is routed correctly.
- Slip the slits in the carpet over the hooks.
- Replace any damaged clips.