Sunroof / Moonroof Switch: Adjustments

1. Remove the headliner.




2. With the moonroof wrench, close the glass (A) fully:

- Make sure both link lifters (B) are parallel, and in the position shown.
- Check the glass fit to the roof panel and the glass height.

3. With an open-end wrench, loosen the position switch mounting bolts (C).
4. Adjust the position switch (0):

- Move the switch a little at a time, then secure it at the position where you hear a faint click when the switch cam (E) pushes the open/close switch (F).
- Check that the switch contacts the switch bracket (G).

5. Check the operation of the glass (from the tilt-up position to the fully closed position, from the fully open position to the fully closed position) by operating the moonroof switch.