Adding or Replacing Keys: Overview

Since the car comes with three keys, and the immobilizer control unit can accept up to five codes, two more keys can be added to the system. When adding or replacing keys, you need these items:

^ Master Key Blank: P/N 35113-SZ3-Q01, H/C 5202502 or Valet Key Blank: P/N 35114-SZ3-Q01, H/C 5202510

^ Learning Key

^ All existing master keys and valet keys for the car (They need to be programmed along with the new key. If you do not have at least one master key or valet key, refer to page 3 for REPLACING COMPONENTS.)

^ PGM Tester with SN 701 (or higher) software on a 4 MB program card

^ Password code for the PGM Tester program card (If you do not know the password code, ask your Service Manager for it, or find it on the HONDANET 2000 VIN Status Inquiry display.)