Security System Status LED Does Not Come on

1. Is there voltage at terminal 11 of the keyless entry harness connector (B)?

Yes - Go to the next step.
No - Replace the radio.




2. Is there voltage at terminal 14 of the security control unit connector?

Yes - Go to the next step.
No - Locate and repair the open in the BLU/WHT wire.




3. With the keyless entry harness connector (B) connected, run a jumper from terminal 14 of the security control unit connector to ground.
Does the security status LED come on?

Yes - Replace the security control unit.
No - Replace the radio.