Reassembly

REASSEMBLY

CAUTION: When installing the 3rd/4th and 5th synchro hubs. support the shaft on steel blocks. and install the synchro hubs using a press.




1. Support 2nd gear on steel blocks as shown, then install the 3rd/4th synchro hub using the special tools and a press as shown.




2. Install the 3rd/4th synchro sleeve by aligning the stoppers of the 3rd/4th synchro sleeve and hub.

NOTE: After installing, inspect the operation of the 3rd/4th synchro hub set.




3. Install the 5th synchro hub using the special tools and a press as shown.




4. Install the ball bearing using the special tools and a press as shown.

NOTE: Install the ball bearing with the tapered and facing down.