Doors - Loose Seal

Bulletin No.
93-001



Issue Date
JAN 15, 1993



Model
1992-93 PRELUDE



Applicable To
ALL



File Under
BODY



Loose Door Seal



PROBLEM

The seal around the door opening has come loose from the body.

CORRECTIVE ACTION

Reinstall the door seal with adhesive.





1. Pull the door seal away from the door opening flange in the affected area. Clean the door opening flange with 3M General Purpose Adhesive Cleaner (P/N 051135-08984) or equivalent.

2. Apply a thin coat of 3M Weatherstrip Adhesive (P/N 051135-08011) to the door seal and to the door opening flange. Allow the adhesive to dry until tacky.

NOTE:
Applying too much adhesive or attaching the seal before the adhesive becomes tacky may allow the seal to come loose again.

3. After allowing the adhesive on both surfaces to become tacky, press the door seal back in place on the door opening flange.



WARRANTY CLAIM INFORMATION

In warranty:
The normal warranty applies.

Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must request consideration, and get the DSM's decision, before starting work.






Failed part:
P/N 72355-SS0-003
H/C 3949203

Defect code: 061

Contention code: A02