Piston Pin: Service and Repair
REMOVALPiston Pin Base Assembly:
1. Assemble the piston pin tools as shown.
Piston Pin Removal:
2. Adjust the length A of the piston pin driver.
A: 51.5 mm (2.03 in)
3. Place the piston on the piston base and press the pin out with a hydraulic press.
INSTALLATION
Piston To Rod Orientation:
NOTE: Install the assembled piston and rod with the oil hole facing the intake manifold.
1. Use a hydraulic press for installation.
- When pressing the pin in or out, be sure to position the recessed flat on the piston against the lugs on the base attachment.
Piston Pin Installation:
2. Adjust the length B of the piston pin driver.
B: 51.5 mm (2.03 in)