Front Position Switch Test

Front Position Switch Test

CAUTION: Always remove the No. 35 (30 A) or No. 36 (30 A) shoulder buckle motor fuse in the under-hood relay box before testing, otherwise the motor may suddenly activate.





1. Disconnect the 2-P connector from the floor harness.
2. Check for continuity between the No.7 and No.8 terminals.
There should be no continuity when the shoulder buckle is in the front position.
There should be continuity when the shoulder buckle is not in the front position.





NOTE: Operate the shoulder buckle motor manually by inserting the wrench provided in the tool bag into the motor socket.