Replacement

NOTE: During replacement, apply a sealing compound on the sealing surface between the shift arm cover assembly and the transmission case.

CAUTION:
- Use Three Bond 1216 as a sealing compound.
- Remove all dirt and oil from the sealing surface.
- Apply the sealing compound on the central part of the sealing surface.
- Seal the entire circumference of the bolt hole to prevent oil leakage.
- When the sealing surface has remained untouched for more than 20 minutes after application of the sealing compound, do not replace the parts without sealing the surface again.
- Refill the oil after 30 minutes after replacement.