Removal

REMOVAL
1. Shift transmission into neutral.




2. Remove the mainshaft bearing retainer plate.




3. Pull out the shift guide shaft.
4. Pull out reverse idler shaft and remove gear.




5. Pull the 3rd/4th and 1st/2nd shift shafts up, to shift into fourth and second.
6. Remove the 5th/reverse shift shaft by pulling it up while lifting the reverse shift fork.




7. Tilt interlock and shift guide to the side, then lift them out.




8. Remove countershaft and mainshaft as an assembly, with 1st/2nd & 3rd/4th shift shafts.