Shift Lock Solenoid/Shift Lock Switch Assembly

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Center console.





3. Manual selector illumination lamp from shift indicator.
4. Four screws from shift indicator.
5. Reposition the shift indicator to gain access to the shift lock solenoid/shift lock switch assembly.





6. Shift lock solenoid and shift lock switch electrical connectors from shift lock solenoid/shift lock switch assembly.





7. Two screws and shift lock solenoid/shift lock switch assembly from manual selector.

Inspect
- For shift lock solenoid/shift lock switch assembly diagnosis procedures, refer to ELECTRICAL DIAGNOSIS.

INSTALL OR CONNECT
1. Shift lock solenoid/shift lock switch assembly to manual selector; secure with two screws.
2. Shift lock solenoid and shift lock switch electrical connectors to shift lock solenoid/shift lock switch assembly.

Important: Upon completion of shift lock solenoid/shift lock switch assembly installation, perform the following steps to ensure proper operation:
A. Temporarily install negative (-) battery cable.
B. When ignition switch is turned to LOCK solenoid is NOT energized.
C. When ignition switch is turned to ON, and the brake pedal is not depressed, the solenoid is NOT energized.
D. When ignition switch is turned to ON, and the brake pedal is depressed, the solenoid is energized.
E. Remove negative (-) battery cable.

3. Reposition the shift indicator to its original position.
4. Four screws to shift indicator.
5. Manual selector illumination lamp into shift indicator.
6. Center console.
7. Negative (-) battery cable.