Manual Selector

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Center console.





3. One spring clip and shift select cable from manual selector lever.





4. One E-clip and shift select cable from manual selector base.





5. OVERDRIVE switch manual selector illumination lamp and shift lock control module electrical connectors from manual selector.





6. Four bolts and manual selector from vehicle.

INSTALL OR CONNECT
1. Manual selector into vehicle, secure with four bolts.
- Tighten manual selector bolts to 13 Nm (115 inch lbs.).





2. OVERDRIVE switch manual selector illumination lamp and shift lock control module electrical connectors to manual selector.
3. Shift select cable into manual selector base; secure with one E-clip.
4. Shift select cable to manual selector lever; secure with one spring clip.
5. Center Console.
6. Negative (-) battery cable.