H. Intermediate Shaft and Countershaft Drive Gear

REMOVE OR DISCONNECT





1. Intermediate shaft seal ring from intermediate shaft.





2. Rear planetary ring gear snap ring and rear planetary ring gear from rear planetary ring gear flange on intermediate shaft.

Clean
- All intermediate shaft and countershaft drive gear components and dry thoroughly.

Inspect
1. Intermediate shaft and rear planetary ring gear flange for excessive wear or damage. Replace as necessary.
2. Countershaft drive gear for excessive wear or damage. Replace as necessary.
3. Countershaft drive gear inner and outer bearings for excessive wear or damage. Replace countershaft drive gear inner bearing and countershaft drive gear as necessary.

INSTALL OR CONNECT

- Tool Required:
- J 36850 Transjel Transmission Assembly Lubricant

1. Rear planetary ring gear onto rear planetary ring gear flange on intermediate shaft; secure with rear planetary ring gear snap ring.
2. One new seal ring onto intermediate shaft.
3. Apply J 36850 to the new intermediate shaft seal ring.