Parking Brake Warning Switch: Service and Repair

Remove or Disconnect
1. Negative (-) battery cable.
2. Two screws securing center console to rear center console.
3. Three screws from rear tray of rear center console after removing felt liner (or arm rest/storage compartment, if equipped) from tray.
4. Raise parking brake lever and lift rear center console from vehicle.
5. Parking brake switch electrical connector.
6. One screw and parking brake switch from vehicle.

Install or Connect
1. Parking brake switch to vehicle; secure with one screw.
2. Parking brake switch electrical connector.
3. Raise parking brake lever and lower rear center console into vehicle.
4. Three screws to rear tray of rear center console and install felt liner (or arm rest/storage compartment, if equipped) to tray.
5. Two screws securing center console to rear center console.
6. Negative (-) battery cable. Refer to Battery Replacement in Battery.