Hazard Warning Switch: Service and Repair

Description:

Remove or Disconnect
1. Negative (-) battery cable.
2. Ashtray from ashtray guide by depressing spring loaded tab and pulling rearward.
3. Center console trim bezel from center console by prying with flat bladed screwdriver to release six clips.
4. Cigar lighter, rear defogger switch and hazard switch electrical connectors.
5. Cigar lighter and ashtray illumination bulbs from center console trim bezel and remove bezel from vehicle.
6. Depress tab on each side of rear defogger switch/hazard switch assembly and remove from center console trim bezel.

Disassemble
^ Depress three tabs and remove rear defogger switch from rear defogger switch/hazard switch assembly (if required).

Assemble
^ Slide rear defogger switch into rear defogger switch/hazard switch assembly until tabs engage.

Install or Connect
1. Rear defogger switch/hazard switch assembly to center console trim bezel; push to engage tabs.
2. Cigar lighter and ashtray illumination bulbs.
3. Cigar lighter, rear defogger switch and hazard switch electrical connectors.
4. Press center console trim bezel into center console until clips engage.
5. Slide ashtray into ashtray guide until spring loaded tab engages.
6. Negative (-) battery cable. Refer to Battery Replacement in Battery.