Cruise Control Switch Assembly

TOOL REQUIRED:
J 38125-A Terminal Repair Kit

REMOVE OR DISCONNECT
1. Inflator module from steering wheel.

Cruise Control Switch Location:

2. Cruise control switch electrical connector from SRS coil assembly.
3. Open the Terminal Position Assurance (TPA) on the top of the cruise control switch electrical connector using a terminal remover from the J 38125-A.

Removing Black Wire From Cruise Control Switch Electrical Connector:

4. Black wire from cruise control switch electrical connector using a terminal remover from the J 38125-A.

INSTALL OR CONNECT
1. Black wire to cruise control switch electrical connector.
2. Close the TPA on the top of the cruise control switch electrical connector.
3. Cruise control switch electrical connector to SRS coil assembly.
4. Inflator module to steering wheel.