Front

CAUTION: Wheel speed sensor is serviceable only as an assembly. Do not attempt to service the sensor harness pigtail.

Front Wheel Speed Sensor Electrical Connector:

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Wheelhousing. Refer to Body and Frame.
3. Wheel speed sensor electrical connector.

Front Wheel Speed Sensor Pigtail Harness:

4. Two nuts and clip retaining wheel speed sensor pigtail harness to vehicle.

Front Wheel Speed Sensor:

5. One bolt and wheel speed sensor from steering knuckle.

INSTALL OR CONNECT
1. Wheel speed sensor to steering knuckle, secure with one bolt.
^ Tighten Front wheel speed sensor bolt to 7.8 Nm (69 inch lbs.).
2. Wheel speed sensor pigtail harness to vehicle, secure with two nuts and clip.
^ Tighten Front wheel speed sensor pigtail harness nuts to 5.4 Nm (48 inch lbs.).
3. Wheel speed sensor electrical connector.
4. Wheel housing.
5. Negative (-) battery cable.