EGR Backpressure Transducer: Service and Repair

REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Disconnect the four vacuum hoses from the EGR Pressure Transducer.
3. Remove the EGR Pressure Transducer from retainer.

INSTALLATION PROCEDURE
1. Install the EGR Pressure Transducer to the retainer.
2. Connect the four vacuum hoses to EGR Pressure Transducer.
3. Connect the negative battery cable. Negative (-) battery cable-to-negative battery terminal retainer to 15 Nm (11 lb. ft.).