Turn Signal Lamp: Service and Repair

Remove or Disconnect
1. Negative (-) battery cable.
2. One screw and gently pry front turn signal housing from fascia
3. Front turn signal electrical connector.
4. Front turn signal lamp socket from front turn signal housing.
5. Front turn signal lamp bulb from socket (if required).

Install or Connect
1. Front turn signal lamp bulb to socket (if removed).
2. Front turn signal lamp socket to front turn signal housing.
3. Front turn signal electrical connector.
4. Gently push pin on front turn signal housing into receptacle on fascia; secure with one screw.
5. Negative (-) battery cable.