Daytime Running Lamps (DRL) Relay No. 3 and 4 Replacement

Description:

Remove or Disconnect
1. Negative (-) battery cable.
2. Knee bolster. Refer to Instrument Panel, Gages and Console.
3. One screw and left side vent tube.
4. Two screws and mounting bracket.
5. DRL relay no. 3 and 4 electrical connector.
6. DRL relay no. 3 and 4 from bracket by releasing clip with fiat-bladed screwdriver.
7. DRL relay no. 3 and 4 from vehicle.

Install or Connect
1. DRL relay no. 3 and 4 to mounting bracket.
2. DRL relay no. 3 and 4 electrical connector.
3. Mounting bracket; secure with two screws.
4. Left side vent tube; secure with one screw.
5. Knee bolster. Refer to Instrument Panel, Gages and Console.
6. Negative (-) battery cable. Refer to Battery Replacement in Battery.