Cylinder Head Removal

REMOVAL
1. Relieve fuel pressure. See Powertrain Management.
2. Negative (-) battery cable.
3. Intake manifold and throttle body.
4. Exhaust manifold. See Exhaust System.
5. Timing belt and belt tensioner.
6. Distributor from cylinder head. See Powertrain Management.
7. Distributor case from cylinder head. See Powertrain Management.
8. Cylinder head cover.
9. Loosen all valve lash adjusting screw locknuts and turn back screws until all valves are closed.

CAUTION: To prevent warpage of cylinder head, follow sequence shown whenever removing or installing head.





10. Ten cylinder head bolts and cylinder head with rubber seal and gasket from vehicle.