Rear Wiper Motor

Rear Wiper System:

Rear Wiper Motor:

Remove or Disconnect
1. Negative (-) battery cable.
2. Plastic retaining clips and hatchback door inner trim panel from vehicle.
3. Rear wiper motor electrical connector.
4. Rear wiper motor ground screw.
5. Three rear wiper motor mounting nuts and wiper motor from hatchback door.
6. Rear wiper linkage from rear wiper motor crank arm.

IMPORTANT:
The wiper motor crank arm is not serviced separately and should not be disconnected from the wiper motor. The crank arm is positioned on the wiper motor to allow the wiper arm to return to its normal park position.

Install or Connect
1. Wiper linkage to wiper motor crank arm.
2. Wiper motor assembly to hatchback door; secure with three mounting nuts.
3. Wiper motor ground screw.
4. Wiper motor electrical connector.
5. Hatchback door inner trim panel; secure with plastic retaining clips.
6. Negative (-) battery cable.