Front Wiper Motor

Front Wiper/Washer System:

Remove or Disconnect
1. Negative (-) battery cable.
2. Wiper motor electrical connector.
3. Three wiper motor mounting bolts; pull motor away from bulkhead.
4. Gently pry wiper linkage from wiper motor crank arm.

IMPORTANT:
^ The wiper motor crank arm is not serviced separately and should not be disconnected from the wiper motor. The crank arm is positioned on the wiper motor to allow the wiper arms to return to their normal park position.

5. Wiper motor from vehicle.

Install or Connect
1. Wiper linkage to wiper motor crank arm.
2. Wiper motor to bulkhead; secure with three mounting bolts.

Tighten
^ Wiper motor mounting bolts to 20 N.m (15 lb.ft.).

3. Wiper motor electrical connector.
4. Negative (-) battery cable.