Rear Transaxle Mount

REMOVE OR DISCONNECT
1. Raise and suitably support vehicle.
2. Support transaxle with a suitable hydraulic jack.
3. Rear transaxle mount through bolt and nut.
4. Into bolts and rear transaxle mount from vehicle.

INSTALL OR CONNECT .
1. Rear transaxle mount into vehicle; secure with two retaining bolts.

Tighten
- Rear transaxle mount retaining bolts to 60 N.m (44 lb. ft.).

2. Rear transaxle mount through bolt and nut.

Tighten
- Rear transaxle mount through,bolt,and nut to 60 N.m (44 lb. ft.).

3. Remove hydraulic jack from under transaxle.
4. Lower vehicle.