Left Transaxle Mount

REMOVE OR DISCONNECT
1. Raise and suitably support vehicle.
2. Five retainer clips and left splash shield from vehicle.
3. Support transaxle with a suitable hydraulic jack.





4. Two retaining nuts from left transaxle mount.





5. Through bolt from left transaxle mount.
6. Lower transaxle slightly until left transaxle bracket is clear of left transaxle mounting studs.
7. Left transaxle mount from vehicle.

INSTALL OR CONNECT
1. Left transaxle mount into vehicle.
2. Raise transaxle into position using a suitable hydraulic jack.
3. Left-transaxle mount through bolt into left transaxle mount.

Tighten
- Left transaxle mount through bolt to 60 N.m (44 lb. ft.).

4. Two retaining nuts to left transaxle mount.

Tighten
- Left transaxle mount retaining nuts to 60 N.m (44 lb. ft.).

5. Remove hydraulic jack.
6. Left splash shield onto vehicle; secure with five retainer clips.
7. Lower vehicle.