Output Shaft: Service and Repair

REMOVE OR DISCONNECT
1. Right drive axle assembly from vehicle. Refer to Drive Axle Assembly.
2. Three bolts from center support bearing arbor and right inner drive axle from transaxle.

Inspect
- Right inner drive axle and center support bearing for rough operation, excessive wear or damage. For disassembly and inspection procedures, refer to Unit Repair.

INSTALL OR CONNECT
1. Right inner drive axle into transaxle; secure with three bolts in center support bearing arbor.

Tighten
- Center support bearing arbor bolts to 60 N.m (44 lb. ft).

2. Right drive axle assembly into vehicle. Refer to Drive Axle Assembly.